voltage at R15 and R32

[radrobot]

R15 - getting 22.4v

R32 - getting -22.5v

Not sure if these readings fall into the acceptable range.

Checked everything (diodes, caps, etc) and everything looks correct.

Thanks.

[tpryan]

You're probably fine. If you measure the "other" ends of R15/R32 the values should be closer to +/-24V.

[radrobot]

Thanks for the reply.

I took voltage measurements again.

R15: 22.3v (top)
24.7v (bottom

R32: -24.9 (top)
-22.6 (bottom)

Not sure if these are still in the OK range.

[tpryan]

Looks good.