so recently i built 2 c84s and they were working great. recently i went to use them and noticed when using dynamics or a ribbon the noise floor is really loud. i was wondering if anyone had a solution for this? the gain when using condensers is really hot. typically i can't turn the pre up at all and it is still overloading things.
any thoughts would be awesome!
-rick
both pres are noisy now
4 posts
• Page 1 of 1
both pres are noisy now
by rjrockandrollmachine » Sun Dec 21, 2008 1:21 pm
- rjrockandrollmachine
- Posts: 6
- Joined: Tue Sep 30, 2008 4:12 pm
by rjrockandrollmachine » Sun Dec 21, 2008 4:14 pm
i bought them in october so it should be the rev 1.9 boards.
-rick
-rick
- rjrockandrollmachine
- Posts: 6
- Joined: Tue Sep 30, 2008 4:12 pm
by tpryan » Sun Dec 21, 2008 6:06 pm
Has this symptom just appeared, or have you just recently noticed it?
What sort of recorder or interface are the preamps connected to?
Are you absolutely certain that you're driving a line level input set to +4dBu and not a mic level input?
Does the noise disappear if you short pin 2 to pin 3 at the input XLR?
What sort of recorder or interface are the preamps connected to?
Are you absolutely certain that you're driving a line level input set to +4dBu and not a mic level input?
Does the noise disappear if you short pin 2 to pin 3 at the input XLR?
- tpryan
- Site Admin
- Posts: 2078
- Joined: Thu Dec 04, 2003 11:32 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 9 guests