Hello, I recived my A12 kits yesterday, and noticed that at least in the caps that I didn't recive two of the 4 .1uF caps that I needed.
Should I order these parts (as well as any others I find missing) from Mouser etc or something else?
Best,
Walter
BOM and actual parts Rev 1.7
2 posts
• Page 1 of 1
BOM and actual parts Rev 1.7
by Falcowe » Fri Feb 13, 2015 12:49 pm
- Falcowe
- Posts: 2
- Joined: Fri Feb 13, 2015 12:44 pm
Re: BOM and actual parts Rev 1.7
by Falcowe » Sun Feb 15, 2015 1:27 pm
So as it turns out I am not missing any caps. I finally found the assembley instructions (after quite a bit of digging) and found that I don't need the caps I thought I was missing.
- Falcowe
- Posts: 2
- Joined: Fri Feb 13, 2015 12:44 pm
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests