Blinking LED on power supply

Post questions or comments about the CH02 and OneShot here.

Blinking LED on power supply

Postby mjelinekperth » Mon Jul 08, 2013 11:37 pm

Hi all,

I've had my CH02 for over a year now, with 1 D11, 2 N72's and an A12. I just received a second A12 and a B16 compressor (preassembled).

When I connect the B16, the LED on the power module blinks, but when I disconnect it, it powers up fine. I would try and troubleshoot this issue but unfortunately I'm inexperienced at electronics (hence why I ordered the preassembled kit).

Can anyone help me out on what the problem might be?

Thanks,

Michael
mjelinekperth
 
Posts: 2
Joined: Mon Jul 08, 2013 11:02 pm

Re: Blinking LED on power supply

Postby tpryan » Tue Jul 09, 2013 5:54 pm

There is a voltage regulator near the bottom of the B16 board. Make sure it's not touching the chassis.
tpryan
Site Admin
 
Posts: 2078
Joined: Thu Dec 04, 2003 11:32 pm


Return to Chassis and Power Supplies

Who is online

Users browsing this forum: No registered users and 1 guest

cron