XLR and 1/4" TRS combo jack.

[sands]

Do these kits have XLR only or can a XLR and 1/4 combo jack work? I've noticed these on many products now days and they are really nice. Most of my recording equipment uses these.

[niccolo]

Hi Sands,
XLR only here..
You can build your own XLRF/TRS adapter if your card inputs need it.
Don't know if you can mount a combo instead of the stock connectors.
Why would you do that?

nicco

[dkatz42]

The Neutrik combo parts I've worked with bring out the XLR and TRS connectors to separate pins, making them incompatible with the PCB. I used them for some of the tie lines in my studio. Pain in the rear soldering little jumpers in there to connect the TRS and XLR sides together...

[sands]

My current I/O only has 1/4 inputs so I was curious. I'm a dumb musician, so there's most of the ignorance. I assume buying cables that are XLR to 1/4 will work fine.

thanks for the quick response, very much appreciated.

sands

[dkatz42]

Yep, adapter cables should be fine.

[niccolo]

TRS!

[tpryan]

The connectors are XLR only. Neutrik does not make a combo jack in the same board-mounted, right-angle, rotated configuration.