Hey everybody,
I'm concerned my PS03 isn't working properly. For starters, when I power it up with no modules connected, the LED's pulsate. It never looks like they are fully lit. Additionally, when I measure the voltages from the pins, I get voltages fluctuating around 2.4VDC where I should be seeing 30VDC, and I don't see any 48VDC either.
I just finished building my first n72, I was originally checking that for mistakes because I couldn't get a high enough voltage to properly bias it. I've checked my work on the n72, and I can't find any errors, so now I'm thinking it's the PSU. When I look at the PCB, a bunch of holes are left unfilled where it looks like there should be resistors, caps, etc...Is this normal?
Thanks in advance,
James