Board Silkscreen vs BOM

Post questions or comments about the A12 here.

Board Silkscreen vs BOM

Postby kid » Wed Oct 20, 2004 3:17 am

Hey Tim,
Upon looking over my kit I noticed that the board has some differences compared to the BOM. For example R14 on board says 1K00 but BOM says 562. There are a few more that I noticed looking very quickly. Should I always go off of the BOM or the board? It seems that the schematic matches the BOM.
kid
 
Posts: 32
Joined: Tue Mar 02, 2004 1:23 pm
Location: Sea Cliff, New York

Postby Category 5 » Wed Oct 20, 2004 4:32 am

Go by the BOM and the schematic. The values on the board were changes after the printing was done.

The resistor numbers are correct, but the values have changed. in other words, "r1" is still where "r1" is printed, just the resistance has changed.

Shane
Category 5
 
Posts: 211
Joined: Fri Jul 16, 2004 10:08 pm


Return to A12

Who is online

Users browsing this forum: No registered users and 11 guests

cron