Output Transformer colors

[jarbar]

Hi there.

The output tranny I have has two grey wires (one light, one dark - in another post they say the light grey one is the "brown"), but they are in a different order than in the instructions. From the photo the wires go into the holes in the PCB board in order.

I just want to make sure that I should follow the silkscreened color order and that the light grey is indeed the brown wire.

Thanks so much for your help

[tpryan]

Follow the silkscreen, not the photos. If you're in doubt about which lead is paired with which, check it with your ohmmeter.