SCA FRONT PANEL

[datapanik]

Hello Tim

I am the very satisfied owner of a SCA rack with six A12 and two
N72 preamps.

But I would like to do a new paint job on the front panel because I changed the knobs for some old french bakelite STOCKLI knobs and they are bigger than the originals and they hide the original printings. I would like to know if you can tell me the whole dimensions of the holes and the centers for the printings, then I will ask a friend of mine who does wonderfull silkscreen printings.

I am sorry I don't have the good tools to take accute measurements, and I would like to have everything centered around the holes and for the name of the functions.

Thank you very much for your reply.
All the best,

Teo

[tpryan]

Sorry, but detailed drawings of the CH01 are not available. If you want to make modifications I'm afraid you're on your own, but since you have the front panel it should be quite simple to get the dimensions you need. You may have an easier time using an imperial rule rather than metric.

[datapanik]

Ok tim

I understand ... anyway thanks