Instructions for wiring harness??

[Nisso27]

Will there be instructions for wiring harness assembly?? i dont want to kill anything

[Nisso27]

i guess ill have to try on my own so pin 1 is red wire then 2 is black etc? Then you strip 1 end of wire toss it on 1 of those connectors and thats the psu end?? then you cut and strip the wire combine 2 ends in one connector and thats your pin 1(red wire) and you do that for each daisy changing along the way??? so pin 1-3-5 are red wire and pin 2-4-6 are black?? please somone let me know or post some nice pics so i can try to follow along thanks

[sbranco]

Sounds like you've got it right. Look under general discussion power connector options for some pics of other connectors but its the same basic thing. Alternate red and black. Pin 1 of PSU goes to Pin 1 of module connector. We left about 10 or 11 inches between the psu and first module then about 6 inches between each module and had plenty of wire left over.