T15 Rev 1.5?
3 posts
• Page 1 of 1
T15 Rev 1.5?
by fnord » Fri Jan 10, 2014 2:49 pm
Are there assembly instructions for boards that say rev 1.5 on them? I see 1.2 posted. Things went pretty straightforwardly until step 8. The text says L3 and L4, but its a picture of L1 and L2 that look different from my board.
- fnord
- Posts: 1
- Joined: Fri Jan 10, 2014 2:42 pm
Re: T15 Rev 1.5?
by CarsandBikes » Mon Mar 31, 2014 10:58 am
I received an email response from Tim, so I figured I'd post his response for the next person with this question. He said the following, regarding the inductors:
> Do I solder in all 6 inductors?
Yes. If you intend to install the T15 in a OneShot, you may find it easier
to leave L1 and L2 off and use the empty holes to connect jumpers to the
OneShot relay board.
> Do I solder in all 6 inductors?
Yes. If you intend to install the T15 in a OneShot, you may find it easier
to leave L1 and L2 off and use the empty holes to connect jumpers to the
OneShot relay board.
- CarsandBikes
- Posts: 2
- Joined: Sun Mar 30, 2014 12:55 am
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 5 guests