No power in the power supply.

[edwin]

I am getting power to the connector that goes to the power switch and the power switch harness works. I am not sure how to go about troubleshooting. I believe that this is most recent iteration of PS design.

Any ideas gratefully accepted!

Edwin

[tpryan]

There is no troubleshooting the PS03. If you get no status lights with AC applied and no load connected, please send it in. We've had no failures in the field up to now and I'm very curious to see it.

[edwin]

Well, you can continue with your perfect record! Somehow the crimp terminals aren't contacting the pins properly. When I short the pins, the power supply powers up perfectly.

Thanks for all your help!
Edwin