Connector Labeling

Post questions or comments about the CH02 and OneShot here.

Connector Labeling

Postby Siegfried Meier » Tue May 04, 2004 10:31 am

Hi Tim,

My PS02 is done, but reading through the instructions of the PS01, I'm noticing that the labeling on the connectors is different from the 02. Can you please verify which does which (ex. when checking the 24 V between pins 3 and 4 on J5-J5 is the voltage selector on the 02, what is it on the 01)? Thanks.

Best regards,
Siegfried Meier
Siegfried Meier
 
Posts: 42
Joined: Fri Feb 06, 2004 6:37 am

PS02

Postby tpryan » Tue May 04, 2004 4:36 pm

The PS01 photos and instructions are useful for a general idea of how to assemble the PS02, but for specific information you should refer to the schematic. Also, have a look at the "J2 Voltages" topic for specific instructions on how to measure the output voltages.
tpryan
Site Admin
 
Posts: 2078
Joined: Thu Dec 04, 2003 11:32 pm


Return to Chassis and Power Supplies

Who is online

Users browsing this forum: No registered users and 11 guests

cron