OK I hopefully completed my A12 successfully, now I'm trying to power it. I don't have the CH01, I just wired the connector straight accross, but when I plug in the power supply I get nothing. I noticed the other terminals connect to a switch when installed on the CH01, for now I just want it to be ON.. Can someone tell me how to make it go?
Thanks,
Daren
PS03, how do I turn it on?
3 posts
• Page 1 of 1
PS03, how do I turn it on?
by NeglectedFred » Mon Sep 05, 2005 10:19 am
- NeglectedFred
- Posts: 9
- Joined: Sat Jan 29, 2005 9:58 am
- Location: SLC, UT
by Sean Halley » Tue Sep 06, 2005 10:20 pm
oy!
Look at the instructions in the PS02 section for how to wire the switch. You won't get far without one.
S..
Look at the instructions in the PS02 section for how to wire the switch. You won't get far without one.
S..
The point is not to make the changes, it's to play ideas in time - Scofield
- Sean Halley
- Posts: 27
- Joined: Tue Jun 21, 2005 7:45 am
- Location: Los Angeles
by NeglectedFred » Sun Sep 11, 2005 8:37 am
OK, I assumed if I jumped pin 1 to 2, and pin 3 to 4 on the jumper which connects to the switch it woulprobably work. I got a second opinion and sure enough, it works like a charm, as well as my new A12. I am one happy man!
- NeglectedFred
- Posts: 9
- Joined: Sat Jan 29, 2005 9:58 am
- Location: SLC, UT
3 posts
• Page 1 of 1
Return to Chassis and Power Supplies
Who is online
Users browsing this forum: No registered users and 13 guests