PS02 Voltages out of tolerance

[Jim50hertz]

My PS02 Voltages for my two N72's read as follows

Pin 1 26.7v
Pin 3 -27.7v
Pin 5 48.4v

My guess is that, as the N72's have their own regulator these voltages shold be ok but I wanted to check as the assembly instructions ist a tolerance of 0.2v

Cheers

Jim

[tele_player]

Those are OK. The voltages are predominantly determined by the ratio of the values of two 1% resistors, so if you're within about 2 to 3%, you're OK.