Seventh Circle Audio

I'm currently powering 4 older N72's (no onboard vregs) with a PS02 I have a 3V Zener Diode on each N72 module to bring the voltage down to 24v. I understand that the PS02 can handle up to 600mA. I'm planning on adding 2 A12's and 2 T15's to my chassis. Will the PS02 be able to handle all of the modules? I'm figuring 100mA for each N72 and 45mA for each A12/T15 which will give a total of 580mA which is cutting it close.

-j

It'll probably work fine, but you'll have to try it and see. We've only seen PS02 problems with heavy loads and low line voltage.