Stupid power switch question...

[jaywar]

So far the N72 and PS01 have gone well... But I have a stupid question: What kind of power switch does the PS01 use (DPDT?) and, how exactly does one connect the wires to the switch (assuming I have a DPDT and I would like to use it if possible). Thanks!

[tpryan]

I always use a DPDT, which completely disconnects the supply from the line in the "off" position. See the PS02 instructions to get a general idea of how it should look. However, don't wire the PS01 switch as shown in the PS02 photos. Follow the PS01 schematic. One pole of the switch connects J3 pin 1 to pin 3, the other pole connects J3 pin 2 to pin 4.