Not sure what PSU revision I have but it's about 2 or so years old. Just finished filling up the rack with 8 N72's and now my main LED pulses and all the led's on the psu board flash.
Will an older PSU support 8 N72's in one rack??? I can unplug ANY module and the problem disappears...at least as far as the pulsing lights go. Phantom power is off on all modules.
Not sure what's up - any help would be greatly appreciated!!!!
Pulsing LED
2 posts
• Page 1 of 1
Pulsing LED
by michaels » Sun Sep 26, 2010 6:35 am
- michaels
- Posts: 16
- Joined: Fri Jan 25, 2008 12:17 pm
by tpryan » Mon Sep 27, 2010 10:22 pm
What you're probably seeing is the supply attempting to start, looking for feedback voltage, failing to see it in time, and repeating the process indefinitely. The fix is simply to change a small capacitor on the PS03. Send an e-mail to support@seventhcircleaudio.com for details.
- tpryan
- Site Admin
- Posts: 2078
- Joined: Thu Dec 04, 2003 11:32 pm
2 posts
• Page 1 of 1
Return to Chassis and Power Supplies
Who is online
Users browsing this forum: No registered users and 1 guest