Seventh Circle Audio

Hey Hey!

Ok, through the process of elimination I came up with the fact that my 2 150 ohm resistors for R71 and R71 are Brown-Green-Black-Black-Brown instead of the Brown-Green-Black-Gold called for in the BOM and my R18 5R6 Resistor is Green-Blue-Gold-Gold instead of the Green-Blue-Black-Gold called for in the BOM.

I'm confused. It's been awhile since I've worked with the color codes (so long, in fact that I unfortunately was taught Bad Boys Rape Our Young Girls But Violet Gives Willingly, except with the unfortunate substitution of Black instead of Bad, thank God times have changed!) so I'm not understanding how the one listed in the BOM at 1, 5, x10 (to the zero) (which equals 1) with a +/- of 5% could be 150 ohms.

Likewise for the 5R6. The BOM seems wrong.


Or am I missing something here? Have I forgotten some quirk of the system? I've got a 5.6 and 2 150s left after everything else matches the BOM so I should be ok, but maybe I'm confused on a deeper level?

Oh yeh, and I noticed at least one case of the value of a resistor printed on the pc board differing from the BOM and the actual resistor.

Archmart

I came up with the fact that my 2 150 ohm resistors for R71 and R71 are Brown-Green-Black-Black-Brown instead of the Brown-Green-Black-Gold called for in the BOM and my R18 5R6 Resistor is Green-Blue-Gold-Gold instead of the Green-Blue-Black-Gold called for in the BOM.

Correct, updated BOM will be up soon.

I noticed at least one case of the value of a resistor printed on the pc board differing from the BOM and the actual resistor.

R34, R35, R58, and R59 are 2M2, but silkscreen says 1M0. Will be changed in next rev.