Seventh Circle Audio

Here are the tested values of BOM items 28 through 34:

Item 28, R19 stated value = 1R0, tested value = 2.24
Item 29, R20, R46, R47, R58, R59 stated value = 1R8, tested value range = 2.58 - 2.70
Item 30, R21 stated value = 3R3, tested value = 4.1
Item 31, R5, R6 stated value = 4R7, tested value = 5.5
Item 32, R10 stated value = 5R6, tested value = 6.5
Item 33, R11 stated value = 10R0, tested value = 11.0
Item 34, R12 stated value = 17R8, tested value = 18.6

I tested each one several times and recorded the lowest values.

Should I proceed with soldering or should I get resistors with closer tolerances?

I am using a Fluke 189 with fresh batteries. I clamped onto the resistors with alligator clips and did not touch the resistors when I tested them.

Thanks,
Joe

My multimeter did not register zero ohms when the leads were touched together. The difference in reading is the result of the need for calibration of the multimeter.