R31 through R34 Question

[mrsteaks]

Tim - I've only 1M00 resistors, 4 of them, left. The PCB I have is silkscreened for the R31, R32, R33 and R34 values to be 1M00. Of course, the schematic and BOM do not agree with these values or the values of the resistors I have left. Do I need to get 1 100K and 3 2M00 resistors, or do I use what I have remaining - whose value agrees with the PCB (which is marked Rev 1.9.1). Thanks!

[tpryan]

You have the correct parts. Current BoM and schematic are back up.