Seventh Circle Audio

Posted: **Fri Feb 13, 2015 12:49 pm**

Hello, I recived my A12 kits yesterday, and noticed that at least in the caps that I didn't recive two of the 4 .1uF caps that I needed.
Should I order these parts (as well as any others I find missing) from Mouser etc or something else?
Best,
Walter

Posted: **Sun Feb 15, 2015 1:27 pm**

So as it turns out I am not missing any caps. I finally found the assembley instructions (after quite a bit of digging) and found that I don't need the caps I thought I was missing.

Seventh Circle Audio

BOM and actual parts Rev 1.7

BOM and actual parts Rev 1.7

Re: BOM and actual parts Rev 1.7