Revision 1,7 Resistor color codes

[Dutchman]

I'm having some difficulty with the 1.7 BOM sheet
OK, I admit it....I'm not good enough to look at a MFR and tell if it's 1K02 or a 1K91 resistor.
I do measure every resistor prior to placing, but the stripe coding allowed me to pick out the correct needle from the haystack.

My previous BOM sheet had the resistors values with the stripe color code.

Can I use my old BOM sheet version 1.6 for a reference? I know the resistor stripe coding doesn't change.

Thanks

Jeff

Addendum's: All of the values seem to be the same so far. 1.6 BOM very helpful.

The Capacitor numbers are not there on the 1.7 BOM also.

[tpryan]

Corrected BOM and schematics are up.