A12 sounds great. However, I cranked the gain to 11 and got a pop, followed by a 16 khz squeal and then white noise. Clicking it to 12 caused all of this to disappear.
No problems with the N72. These sound great!
Noise on A12 at 11
4 posts
• Page 1 of 1
Noise on A12 at 11
by Kremer » Thu Mar 23, 2006 6:31 pm
- Kremer
- Posts: 2
- Joined: Thu Mar 23, 2006 6:16 pm
by craigmorris74 » Fri Mar 24, 2006 5:17 am
I would double check your soldering work around the gain switch and the resistors associated with the gain switch.
Craig
Craig
- craigmorris74
- Posts: 54
- Joined: Tue Nov 08, 2005 11:40 pm
- Location: benton, ky
by tpryan » Fri Mar 24, 2006 8:22 am
This is with a mic plugged in? And you're positive you have all the resistors and ceramic capacitors in the right places? If reflowing the solder joints doesn't improve things, try de-fluxing the circuit board.
- tpryan
- Site Admin
- Posts: 2078
- Joined: Thu Dec 04, 2003 11:32 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 17 guests