Okay... I have put my first A12 together and am at the stage where it says to test pin 1 and 2 and then pin 2 and 3 of connector J7 to make sure there is no sho. Well ...I get no reading at all, meaning there is a total open circuit, or so the voltmeter says.
Is this okay?
Thanks.
Final test before power up... question!
3 posts
• Page 1 of 1
Final test before power up... question!
by AudioguyII » Sat Feb 18, 2006 11:31 am
- AudioguyII
- Posts: 5
- Joined: Thu Feb 16, 2006 5:35 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 8 guests