After turning both r25 and r29 counterclockwise 25 turns or until the clicks occur
U1 Pin 3 is reading +14.5 v
U1 Pin 5 is reading -25.2V
All components are in the correct locations.
What is next troubleshooting step. I can provide photos upon request.
Step 34 - Initial Power up and testing
1 post
• Page 1 of 1
Step 34 - Initial Power up and testing
by JJJames » Wed Oct 29, 2014 3:29 pm
- JJJames
- Posts: 4
- Joined: Wed Jul 02, 2014 8:02 am
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 9 guests