The Short on CONN 1
Posted: Thu Jan 20, 2011 7:51 amCan someone suggest to me how to short pins 2 and 3 on CONN 1 on step 38? Im still new at this!
Seventh Circle Audio
Support and Feedback for Seventh Circle Kits
https://forums.seventhcircleaudio.com/
The Short on CONN 1
https://forums.seventhcircleaudio.com/viewtopic.php?f=4&t=1860
Page 1 of 1
Posted: Thu Jan 20, 2011 7:51 amPosted: Fri Jan 21, 2011 3:37 pmOne way is to tack solder a short jumper across pins 2 and 3 of a spare male XLR and plug it into CONN1. You can also jumper the appropriate pins together at J1 and J2 to accomplish the same thing. Check the schematic for details and verify with your DMM.