I have a question regarding the fitment of the OT on the N72 Rev3.4 PCB. My board has a smaller board floating in the opening for the output transformer with jumper and header pins soldered to it. It is preventing the fitment of the OT. Do I remove this little board?
Thanks.
N72 Rev 3.4 OT/PCB
1 post
• Page 1 of 1
N72 Rev 3.4 OT/PCB
by Bluze » Mon Jan 01, 2018 4:24 pm
- Bluze
- Posts: 1
- Joined: Tue Jul 07, 2015 3:46 pm
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest