4 Blue Bourns Inductors L3 - L6 **SOLVED**

[heddykevy]

On version 3.3.1 schematic, it shows the inclusion of the 4 Inductors at l3-l6. I received these inductors with the kit, they are listed in the Bill Of Materials, and they are screen printed onto the PCB. Current instructions make no mention of these inductors.

I understand that when there is any discrepancy, the schematic is the most reliable source for up to date answers. My gut says it's common sense to solder these into the board, but I'd rather not chance compromising any sonic integrity of these preamps.


*EDIT*

Here is the response from SCA:

> Can you please confirm if it is correct to install the 4 blue inductors
> included with rev. 3.3.1 of the N72?

Yes, as you can see from the schematic the circuit will not pass a signal without them.

Best regards,

Seventh Circle Audio