Seventh Circle Audio

Posted: **Wed Apr 15, 2009 9:05 am**

R15 - getting 22.4v

R32 - getting -22.5v

Not sure if these readings fall into the acceptable range.

Checked everything (diodes, caps, etc) and everything looks correct.

Thanks.

Posted: **Wed Apr 15, 2009 10:57 am**

You're probably fine. If you measure the "other" ends of R15/R32 the values should be closer to +/-24V.

Posted: **Wed Apr 15, 2009 12:12 pm**

Thanks for the reply.

I took voltage measurements again.

R15: 22.3v (top)
24.7v (bottom

R32: -24.9 (top)
-22.6 (bottom)

Not sure if these are still in the OK range.

Posted: **Wed Apr 15, 2009 12:21 pm**

Looks good.

Seventh Circle Audio

voltage at R15 and R32

voltage at R15 and R32