T15 woes

Post questions or comments about the T15 here.

T15 woes

Postby adrianloera » Fri Jun 11, 2010 9:21 pm

I'll cut to the chase. Just finished the T15 and I'm getting a veeery faint signal. Here's what I know the only current that seems to be flowing all the way through is pin 1 (tested from conn1 and conn2) So something is obstructing in pins 2 and 3. All diodes and caps are placed correctly. By the way, just sucessfully built 2 a12's (but was bummmed I couldn't get this one runnin!!)
anyways, any help from anyone would be greeatly appreciated :D
adrianloera
 
Posts: 12
Joined: Wed Jun 02, 2010 11:59 pm

Postby tpryan » Sun Jun 13, 2010 9:27 pm

Do you measure +/-18v at the test points?

What voltage do you measure at U1, pin 6?
tpryan
Site Admin
 
Posts: 2078
Joined: Thu Dec 04, 2003 11:32 pm

SUCCESS

Postby adrianloera » Mon Sep 06, 2010 6:28 am

Just checkin in to say, I got the T15 workin yesterday :D
I had dropped it for about 3 months, started workin on other D.I.Y projects. Came back to this one and it all made more sense.

Word of advice to any new comers who struggled with these kits
WATCH OUT FOR COLD JOINTS!!
adrianloera
 
Posts: 12
Joined: Wed Jun 02, 2010 11:59 pm


Return to T15

Who is online

Users browsing this forum: No registered users and 1 guest

cron