I am about to add some T15's to my existing SC lineup.
Wondering what, if any, advantages there might be in adding an input transformer to this pre.
I already have the transformers, so additional cost is not a factor.
Thanks.
Adding an input transformer
4 posts
• Page 1 of 1
Adding an input transformer
by Bill_Urick » Mon Sep 14, 2009 5:04 am
- Bill_Urick
- Posts: 5
- Joined: Mon May 18, 2009 3:52 pm
by tpryan » Wed Sep 16, 2009 4:04 pm
There aren't really any advantages, but you may prefer the problems caused by the transformer to the problems caused by the phantom blocking caps. See this data sheet at Jensen: http://www.jensen-transformers.com/datashts/mbca.pdf
- tpryan
- Site Admin
- Posts: 2078
- Joined: Thu Dec 04, 2003 11:32 pm
by Bill_Urick » Wed Sep 16, 2009 6:01 pm
tpryan \$m[1]: you may prefer the problems caused by the transformer to the problems caused by the phantom blocking caps.
Love this answer.
Life's just that way, isn't it?
- Bill_Urick
- Posts: 5
- Joined: Mon May 18, 2009 3:52 pm
by rhythminmind » Wed Sep 28, 2011 12:42 pm
I have a pair of mbca's that I would like to experiment with. What CAPs/circuity would I remove/bypass from the t15 schematic?
- rhythminmind
- Posts: 19
- Joined: Tue Aug 19, 2008 8:14 am
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest