Hey Tim --- Voltage Question...
Posted: Wed Mar 19, 2008 8:19 pmI just built my two C84's.
Step 38 I read 11.84V - should be 13-14V
Step 39 I read 54.4mV - should be < 50mV
At the junction of R29 and R30 I read 51.9mV
Step 38 I read 12.12V - should be 13-14V
Step 39 I read 65.5mV - should be < 50mV
At the junction of R29 and R30 I read 58.8mV
Can I fix this? Is this okay?
Voltage on U1 and U3 is the propper +/-18V for both units.
Step 38 I read 11.84V - should be 13-14V
Step 39 I read 54.4mV - should be < 50mV
At the junction of R29 and R30 I read 51.9mV
Step 38 I read 12.12V - should be 13-14V
Step 39 I read 65.5mV - should be < 50mV
At the junction of R29 and R30 I read 58.8mV
Can I fix this? Is this okay?
Voltage on U1 and U3 is the propper +/-18V for both units.