626 vs 647 & 537 vs. 645 on polarized ceramic capacitors

[canderson]

Just wondering if there is any real cause for concern with regards to "what part goes where" given the following two very similar scenarios:

The 2- 22uF/35V polarized ceramic capacitors that go in spots C36 & C40 have markings on them that read 226 and 35 as the first two sequences of number. The 3rd number on one appears as 626 and as 647 on the other capicitor. Does this 3rd number in the sequence make a difference at to WHERE the part is most properly soldered?

Much along the same line the 6 - 1uF/ 35V ceramic capacitors that go in C44 through C49 have 3 digits on each of them. 5 of the 6 have 105 35 and the 3rd number appears as as 645. The one that is different has the sequence 105 35 537 on it. Does this 3rd number on the one capacitor that is different from the other five make a difference as to WHERE this part is most properly soldered?

Thanks for any direction on this!

chris

[tpryan]

Does this 3rd number in the sequence make a difference at to WHERE the part is most properly soldered?

No, in both cases.

[canderson]

Thanks Tim!