Shunt at J5?
6 posts
• Page 1 of 1
Shunt at J5?
by daveotero » Mon Oct 03, 2005 10:38 am
Not totally sure what to put here. Am I supposed to bend a spare lead and just complete the circuit?
Dave Otero
www.flatlineaudio.com
www.flatlineaudio.com
- daveotero
- Posts: 8
- Joined: Fri Sep 02, 2005 1:24 pm
by tele_player » Tue Oct 04, 2005 2:51 am
You could do that, but the kit's supposed to include a header for a jumper shunt at that location.
In nearly all current applications (driving high impedance devices like line inputs on converters, interfaces), you'll want that jumper installed, so just soldering a wire there is OK.
In nearly all current applications (driving high impedance devices like line inputs on converters, interfaces), you'll want that jumper installed, so just soldering a wire there is OK.
- tele_player
- Posts: 410
- Joined: Thu Feb 12, 2004 4:09 pm
by daveotero » Tue Oct 04, 2005 12:02 pm
My kit only came with 3 header/jumpers. Two 3 pins and one 2 pin.
Then again my kit also didn't have a input transformer and had the output transformer from the J99 kit. Maybe somebody had a bad day
Aside from that everything has gone flawlessly. The updated assembly instructions are leagues better than the old ones, and for the other questions I've run into I've found solutions here on the board.
Allmost done! Just have the tranformers and a few caps to go.
Then again my kit also didn't have a input transformer and had the output transformer from the J99 kit. Maybe somebody had a bad day
Aside from that everything has gone flawlessly. The updated assembly instructions are leagues better than the old ones, and for the other questions I've run into I've found solutions here on the board.
Allmost done! Just have the tranformers and a few caps to go.
Dave Otero
www.flatlineaudio.com
www.flatlineaudio.com
- daveotero
- Posts: 8
- Joined: Fri Sep 02, 2005 1:24 pm
by Karl » Thu Oct 06, 2005 7:43 am
DAVE!!!!
Holy crap!
It's Geoff here, from Fog (Drummer)!!!
How are you man?!?! I've been trying to get a hold of you for years!
Glad to see you've invested in some of the best pres in the land. Sorry you've had some bad luck with them so far... I've got (3) A12's and an N72 right now. I want MORE!!!
Anyways, drop me a line buddy, we need to talk!
Holy crap!
It's Geoff here, from Fog (Drummer)!!!
How are you man?!?! I've been trying to get a hold of you for years!
Glad to see you've invested in some of the best pres in the land. Sorry you've had some bad luck with them so far... I've got (3) A12's and an N72 right now. I want MORE!!!
Anyways, drop me a line buddy, we need to talk!
- Karl
- Posts: 69
- Joined: Mon Jul 18, 2005 4:34 pm
- Location: Ft. Wayne, IN
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests