Page 1 of 1
XLR and 1/4" TRS combo jack.
Posted:
Mon Jul 28, 2008 4:15 pmby sands
Do these kits have XLR only or can a XLR and 1/4 combo jack work? I've noticed these on many products now days and they are really nice. Most of my recording equipment uses these.
Posted:
Tue Jul 29, 2008 12:15 amby niccolo
Hi Sands,
XLR only here..
You can build your own XLRF/TRS adapter if your card inputs need it.
Don't know if you can mount a combo instead of the stock connectors.
Why would you do that?
nicco
Posted:
Tue Jul 29, 2008 8:54 amby dkatz42
The Neutrik combo parts I've worked with bring out the XLR and TRS connectors to separate pins, making them incompatible with the PCB. I used them for some of the tie lines in my studio. Pain in the rear soldering little jumpers in there to connect the TRS and XLR sides together...
thanks for the info
Posted:
Tue Jul 29, 2008 11:46 amby sands
My current I/O only has 1/4 inputs so I was curious. I'm a dumb musician, so there's most of the ignorance. I assume buying cables that are XLR to 1/4 will work fine.
thanks for the quick response, very much appreciated.
sands
Posted:
Tue Jul 29, 2008 3:10 pmby dkatz42
Yep, adapter cables should be fine.
Posted:
Tue Jul 29, 2008 5:00 pmby niccolo
TRS!
Posted:
Fri Aug 01, 2008 6:46 amby tpryan
The connectors are XLR only. Neutrik does not make a combo jack in the same board-mounted, right-angle, rotated configuration.