by PJD3 » Tue Aug 06, 2013 4:46 pm
Well,I know its year later but, I did find that one of the voltage regulators on the B16 is very close in proximity to the chassis. When I installed my B16 into the chassis the power supply would shut down shortly after turn on and then would not turn on. I recalled someone else having this issue and discovered that the regulator at the edge of the PCB was leaning against the chassis. I looked at mine and discoved this was also happening to my B16. I put a piece of insulating paper between the regulator and chassis with a little RTV to hold it and its fine now. I am a little worried if the shorting caused any damage to the B16 but hopefully the Power Supply shutdown feature saved the B16. I just need to go back and do a thorough check on the B16. Cant wait to put it to use!
First things first.